InicioCasosMarquesinas para pasarelas y canales: caso práctico de Covered Link

Marquesinas para pasarelas y canales: caso práctico de Covered Link

2026-10-19

Compartir:

A covered walkway is judged by the dry route it provides, not the roof seen from above. Continuity, drainage and the junctions with buildings decide whether it works.

These reference views show a long barrel vault, a cantilevered facade canopy and a funnel-column entrance.

Cubierta de membrana con bóveda de cañón alargada sobre una pasarela corporativa
A continuous barrel-vault canopy gives a clean, weather-protected route between buildings

Resumen del proyecto

Elemento Ámbito de referencia
Aplicación Station, campus, hospital, public promenade
Clear width 2.5–6 m, wider at entrances
Formularios Barrel vault, cantilever, lattice, funnel column
Membrana y marco PVC/PVDF sobre acero galvanizado
Factores determinantes del diseño Continuous cover, drainage, movement, lighting

Lo que debe resolver el diseño

  • Keep the covered width usable. Columns, drainage and lighting all take space from the walking route.
  • Avoid gaps. Joints between canopy modules and buildings create wet spots where people slow down.
  • Collect water above head height. Discharge it away from the walking surface.
  • Allow for movement. Long walkways need movement joints and sliding connections rather than rigid restraint at both ends.

Formas de tejados en este conjunto de referencia

Cantilever along a facade

A single-sided canopy leaves the walkway open. The facade must take the uplift, and the anchor detail must keep the building weathertight.

Cantilevered walkway canopy along a building facade
A single-sided canopy keeps the walkway open while sheltering the route along the facade

Funnel-column entrance

A funnel column carries the roof and collects rainwater in one element. Access for cleaning the internal pipe is essential.

Funnel-shaped membrane columns at a station entrance
Funnel columns combine structure and rainwater collection in one element

Materiales y entrega

Walkways are high-traffic structures, so the membrane should stay clean and the underside should be easy to inspect.

  • PVC/PVDF 850–1100 g/m² in white or a light colour
  • Acero galvanizado con acabado en pintura en polvo en las partes visibles
  • Aluminium gutters with leaf guards and accessible outlets

Preguntas frecuentes

How wide should a covered walkway be?

As a guide, 2.5–3 m suits a campus link. Station walkways are usually wider and are set by the transport authority's design standards.

Can it connect to an existing facade?

Yes, with a designed flashing and movement joint. The facade structure must be checked for the canopy loads.

Can it be installed while the building stays open?

Usually yes. The work is phased, with temporary protection for the walking route.

Hablar sobre un proyecto similar

Send the route plan, building interfaces and required clear width. We will review the canopy form, drainage and connection details.

Lecturas relacionadas: Soluciones personalizadas de marquesinas de membrana

Envía el resumen de tu proyecto · Gama de productos de estructuras de membrana

Publicación recomendada

Solicita un presupuesto

¿Listo para hablar de su proyecto de estructura de membrana?

Comparta con nuestro equipo el alcance, las dimensiones, el escenario de aplicación y la ubicación de su proyecto; le ayudaremos a revisar las opciones estructurales, la selección de materiales y los detalles de la cotización para definir el siguiente paso.

Enviar consulta Solicitar presupuesto
Libre de contactarnos